TiltAdjuster generation 2

We have decided to split the TiltAdjuster in two, the instrument and the adapter. The main reason for this is to increase the quality of the adapter interface surface. The initial idea was to glue them together to form the standard TiltAdjuster, but the screw joint turned out to be firm enough without gluing. In this way the customers can purchase one instrument and adapters as needed. We are currently testing full refractor stack adjustment with promising results.  Refractor adapters will come with screw joint allowing the instrument to be used for this purpose also. We have added a M48 extension unit that can be screwed onto the adapters allowing peoples with first generation TiltAdjusters use the range of adapters.

When using generation 2 TiltAdjusters, the USB wire should be fixed on the adapter to remove any tension on the instrument while adjusting. Rotating the TiltAdjuster should only be done by holding the on adapter part.