.png){kind=logo}
How and where to attach TiltAdjuster
- erik53733
- Feb 18
- 1 min read
See how and to where you can attach TIltAdjuster to help you to remove tilt from your astro imaging setup.
top of page
Search
3 Comments
bottom of page
See how and to where you can attach TIltAdjuster to help you to remove tilt from your astro imaging setup.
Hi Dean,
The reflection should be visible if the tilt is not to way off. Which filter do you "apply" the instrument on when the reflection is detected? How is the reflection centered on the realtime view according to the cross. Full size must be selected.
Erik
I have spent alot of time trying to use my new tilt adjuster. I am not a novice at adjusting tilt. I am using a ZWO 6200 camera attached to a ZWO 2" square filter wheel. When I try and use a 32 mm long by 68mm adapter connected to the filter wheel, and the slide the tilt adjuster into this, I do not see the red blob(laser dot). If I simply lay the tilter down on the face of the filter wheel, which allows for movement of the tilter wheel, I see the red blob. When I try and use the tilter software with this method(no 68mm adapter), I obviously get different results each time as there is movement…
A new version is published at youtube : https://www.youtube.com/watch?v=EdnHMaHeP4c